This applet shows a simple circuit containing one resistor. In addition there is a voltmeter (parallel to the resistor) and an ammeter (in series with the resistor).
You can select the maximum voltage and maximum amperage values tolerated by the meters by using the choose boxes. If you see the warning "Maximum exceeded!", you will have to choose an adequate measuring range. Resistance and voltage can be changed with the four buttons. The values of voltage (U) and amperage (I) are indicated on the bottom right.
| Voltage and amperage are directly proportional in a metallic conductor of constant temperature. |
|
|
| Physics Applets |
URL: http://www.walter-fendt.de/ph14e/ohmslaw.htm
© Walter Fendt, November 23, 1997
Last modification: November 27, 2003
This applet is part of the Contemporary College Physics Simulation Library.